MIXING & MASTERING Services

What is mastering?

Essentially making your track as listenable as possible on all different platforms and mediums, so that people listening to your music (no matter where or how) get the best representation of your art as possible. With this purchase, I will contact you within 24-48 hours (quicker if available) and provide you with an industry-grade master (in all major formats and sample rates) of your track that brings out the best of your project.

For highest quality results, send tracks with the following premaster properties:

• 48kHz recommended (can send higher or lower, will use whatever is provided)

• 1 second of silence at the beginning

• Full tail at end of track (do not cut the tail off during export)

• -6db of headroom

• No limiters on master channel

• Lossless format (.wav, .aiff)

• 24-bit or higher bit depth

For orders of 8+ masters or more, a 10% discount can be applied to the order during checkout using the code BULKORDER.

$60.00 per track, up to 10 Stems, with 2 revisions

What is stem mastering?

Stem mastering is a way to get an improved mixdown and balance on your master. By providing the stems of your project, I am able to shape the sonic quality of your track better to fit your desired sound. This allows for things muddy sections that are inter-twined to be cleaned up bus by bus, rather than applying a single fix over a wide swath of sounds. We can often get a bit more consistent loudness and tone by applying some mixing to each of the stem’s before summing them back to the premaster. With this purchase, I will contact you within 24-48 hours (quicker if available) and provide you with an industry-grade master (in all major formats and sample rates) of your track that brings out the best of your project.

For highest quality results, send your stems with the following properties:

• 48kHz recommended (can send higher or lower, will use whatever is provided)

• 1 second of silence at the beginning

• Full tail at end of track (do not cut the tail off during export)

• -6db of headroom

• No limiters on master channel

• Lossless format (.wav, .aiff)

• 24-bit or higher bit depth

For orders of 4+ masters or more, a 10% discount can be applied to the order during checkout using the code BULKORDER.

What is a mixdown?

A mixdown is a way to get the closest realization to your desired sound on a project. By providing me with all of the stems of your project, we can go through and individually get the most out of each element, and appropriately place it within the sound stage. This allows us to clean up any and all artifacts, fix small transient issues, re-balance any areas that need it, add additional compression and EQ, among other improvements. With this purchase, I will contact you within 24-48 hours (quicker if available) and discuss what you are looking for to get out of your mixdown. We’ll setup a timeline for the project and I’ll begin working on it immediately to get you the best master of your track as possible using the project stems you have sent over. Note that this incluides a final master along with the mixdown, along with up to two revisions of the mixdown.

For highest quality results, send your stems with the following properties:

• 48kHz recommended (can send higher or lower, will use whatever is provided)

• 1 second of silence at the beginning

• Full tail at end of track (do not cut the tail off during export)

• -6db of headroom

• No limiters on master channel

• Lossless format (.wav, .aiff)

• 24-bit or higher bit depth